Filter
Top Products
256 Configuring System Information
•
Protocol Version
— Displays the ISDP Protocol Version for the neighbor.
•
Last Time Changed
— Displays when entry was last modified.
Viewing ISDP Cache Table Information CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• ISDP Commands.
Interface Configuration
From the ISDP Interface Configuration page, you can configure the ISDP settings for each interface.
If ISDP is enabled on an interface, it must also be enabled globally in order for the interface to transmit
ISDP packets. If the ISDP mode on the ISDP Global Configuration page is disabled, the interface will
not transmit ISDP packets, regardless of the mode configured on the interface.
To access the ISDP Interface Configuration page, click System > ISDP > Interface Configuration in
the navigation tree.
Figure 6-129. ISDP Interface Configuration
The ISDP Interface Configuration page contain the following fields:
•
Interface
— Select the interface with the ISDP mode status to configure or view.
•
ISDP Mode
— Use this field to enable or disable the Industry Standard Discovery Protocol on the
selected interface.
Displaying the ISDP Interface Summary Table
1.
Open the
ISDP Interface Configuration
p
age
.
2.
Click
Show All
.
The
ISDP Interface Summary
page displays: