Filter
Top Products
578 Configuring IPv6
Displaying the Pool Summary using the CLI Command
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• DHCPv6 Commands
DHCPv6 Interface Configuration
Use the DHCPv6 Interface Configuration
page to configure a DHCPv6 interface.
To display the page, click IPv6 > DHCPv6 > Interface Configuration in the tree view.
Figure 10-11. DHCPv6 Interface Configuration
The DHCPv6 Interface Configuration pages contain the following fields:
Interface — Select the interface for which you are configuring DHCPv6 server functionality.
Interface Mode — Configure the DHCPv6 mode as either Server or Relay. DHCPv6 server and DHCPv6 relay functions are
mutually exclusive.
Pool Name — Selects the DHCPv6 pool containing stateless and/or prefix delegation parameters. This field displays when the
Interface Mode is Server.
Rapid Commit — Rapid commit is an optional parameter. Specified to allow abbreviated exchange between the client and server.
This field displays when the Interface Mode is Server.
Preference — Selects the preference value used by clients to determine preference between multiple DHCPv6 servers. The values
allowed are between 0 to 4294967295. This field displays when the Interface Mode is Server.