Filter
Top Products
684 Configuring IP Multicast
Prune Summary
Use the Prune Summary
page to display or print the prune summary by Group IP.
To display the page, click IP Multicast > DVMRP > Prune Summary in the tree view.
Figure 12-23. Prune Summary
The Prune Summary page displays the following fields:
•
Group IP
— The group address which has been pruned.
•
Source IP
— The address of the source or source network which has been pruned.
•
Source Mask
— The subnet mask to be combined with the source IP address to identify the source or
source network which has been pruned.
•
Expiry Time (secs)
— The amount of time remaining before this prune should expire at the upstream
neighbor. If no prune messages have been received from downstream neighbors, this is set to value of
the default prune lifetime timer, otherwise it is set to the smallest received value or the default timer,
whichever is less.
Displaying the Prune Summary using the CLI Command
For information about the CLI command that performs this function, see the following chapter in the
CLI Reference Guide:
• DVMRP Commands