Filter
Top Products
Configuring Switching Information 335
Modifying Settings for Multiple LAGs
1.
Open the
VLAN LAG Settings
page.
2.
Click
Show All
.
The
VLAN LAG Table
displays.
3.
Click
Edit
for each LAG to modify.
4.
Edit fields as needed.
5.
Click
Apply Changes
.
The VLAN LAG settings are modified, and the device is updated.
Assigning LAGs to VLAN Groups Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• VLAN Commands
Bind MAC to VLAN
Use the
Bind MAC to VLAN page to map a MAC entry to the VLAN table. After the source MAC
address and the VLAN ID are specified, the MAC to VLAN configurations are shared across all ports of
the switch. The MAC to VLAN table supports up to 128 entries.
To displ ay t he Bind MAC to VLAN page, click Switching > VLAN > Bind MAC to VLAN in the tree
view.
Figure 7-58. Bind MAC to VLAN
The Bind MAC to VLAN page contains the following fields: