Filter
Top Products
288 Configuring Switching Information
–
Full
— Indicates that the interface supports transmission between the switch and the client in
both directions simultaneously.
•
Current Duplex Mode
— Displays the synchronized port duplex mode.
•
Auto Negotiation
— Enables Auto Negotiation on the port. Auto Negotiation is a protocol between
two link partners that enables a port to advertise its transmission rate, duplex mode, and flow control
abilities to its partner.
•
Current Auto Negotiation
— Displays the current Auto Negotiation setting.
•
Admin Advertisement
— Specifies the capabilities advertised by the port. The field values include:
•
LAG
— Displays LAG number if this port is a member of a LAG.
•
Current Flow Control
— Indicates the current Flow Control settings. Possible field values are:
–
Active
— Flow Control is active.
–
Inactive
— Flow Control is inactive.
•
Transceiver Firmware Version
— Displays firmware part number of port transceiver, if available. Valid
only for SFX7101 transceivers on 10GBase-T non-stacking ports.
•
Image Firmware Version
— Displays the version of the image on the firmware.
•
Firmware Update Status
— Indicates the statue of the firmware on the switch:
–
Up-to-date
— The firmware status is current.
–
Outdated
— The firmware status is not current.
•
Max. Cable Length
— Displays the maximum cable length determined by current power backoff level.