Filter
Top Products
580 Configuring IPv6
Configuring a DHCPv6 Interface Using the CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• DHCPv6 Commands
Configuring a DHCPv6 Interface for Server Interface Mode
1.
Open the
DHCPv6 Interface Configuration
page.
2.
Specify the desired Interface, and select
Server
from the
Interface Mode
drop down menu.
The following screen appears:
Figure 10-13. DHCPv6 Interface Configuration - Server
3.
Modify the fields as needed.
4.
Click
Apply Changes
.
The DHCPv6 interface configuration is saved, and the device is updated.