Filter
Top Products
530 Configuring Routing
You can select Static Reject as a route type from the Route Type field on the following pages under the
Routing > Router menu:
• Route Entry Configuration
• Configured Routes
NOTE: For a static reject route, the next hop interface value is Null0. Packets to the network address specified in
static reject routes are intentionally dropped.
To display the page, click Routing > Router > Route Preferences Configuration in the tree view.
Figure 9-41. Router Route Preferences Configuration
The Router Route Preferences Configuration page contains the following fields:
•
Local
— This field displays the local route preference value.
•
Static
— The static route preference value in the router. The default value is 1. The range is 1 to 255.
•
OSPF Intra
— The OSPF intra route preference value in the router. The default value is 110.
•
OSPF Inter
— The OSPF inter route preference value in the router. The default value is 110.
•
OSPF External
— The OSPF External route preference value in the router (OSPF External are OSPF
Type-1 and OSPF Type-2 routes). The default value is 110.
•
RIP
— The RIP route preference value in the router. The default value is 120.
Configuring Route Preferences
1.
Open the
Route Preferences Configuration
page.
2.
Define the applicable fields on this page
3.
Click
Apply Changes
.
The route preferences are configured, and the device is updated.