Filter
Top Products
Configuring System Information 121
Displaying the SNTP Servers Table
1.
Open the
SNTP Servers
page.
2.
Click
Show All.
The
SNTP Servers Table
page displays.
Figure 6-15. SNTP Servers Table
Modifying an SNTP Server
1.
Open the
SNTP Servers
page.
2.
Click
Show All.
The
SNTP Servers Table
opens.
3.
Click
Edit
next to the
SNTP Server
entry you wish to modify.
4.
Modify the
relevant fields.
5.
Click
Apply Changes
.
The SNTP server information is updated.
Removing the SNTP Server
1.
Open the
SNTP Servers
page.
2.
Click
Show
All.
The
SNTP Servers Table
opens.
3.
Select an
SNTP Server
entry.
4.
Check the
Remove
check box.
5.
Click
Apply Changes
.
The entry is removed, and the device is updated.
Defining SNTP Servers Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
: