Filter
Top Products
304 Configuring Switching Information
Figure 7-35. Dynamic Address Table
The Dynamic Address Table contains the following fields:
•
Address Aging (10–1000000)
— Specifies aging time in seconds before a dynamic MAC address is
erased. The default value is 300 seconds.
•
Clear Table
— Clears all dynamic MAC address data from the table when checked and
Apply Changes
is clicked.
•
The
Dynamic Address Table
can be queried by:
–
Interface
— Specifies Unit and Port queried for an address.
–
LAG
— Specifies the LAG queried for an address.
–
MAC Address
— Specifies the MAC address queried for an address.
–
VLAN ID
— Specifies the VLAN number (to which the MAC address is attached) that is queried
for an address.
•The
Current Address Table
contains dynamic address parameters by which packets are directly
forwarded to the ports. The
Current Address Table
contains the following fields:
•
VLAN ID
— Displays the VLAN Tag value.
•
MAC Address
— Displays the MAC address.