Filter
Top Products
722 Configuring IP Multicast
•
CBSR Preference
— The preference value for the local interface as a candidate bootstrap router. The
value of -1 is used to indicate that the local interface is not a candidate BSR interface.
•
CBSR Hash Mask Length
— The CBSR hash mask length to be advertised in bootstrap messages if
this interface is elected as the bootstrap router. This hash mask length is used in the hash algorithm for
selecting the RP for a particular group.
•
CRP Preference
— The preference value for the local interface as a candidate bootstrap router. The
value of -1 is used to indicate that the local interface is not a candidate BSR interface.
•
Neighbor Count
— The number of PIM neighbors on the selected interface.
•
IP Address
— The IP address of the PIM neighbor for this entry.
•
Up Time (hh:mm:ss)
— The time since this PIM neighbor (last) became a neighbor of the local
router.
•
Expiry Time (hh:mm:ss)
— The minimum time remaining before this PIM neighbor is aged out.
Displaying PIM-SM Interface Summary
1.
Open the
PIM-SM Interface Summary
page.
2.
Select the interface to display from the
Interface
drop-down menu.
PIM-SM configuration data for this interface displays.
Displaying PIM-SM Interface Summary using the CLI Command
For information about the CLI command that performs this function, see the following chapter in the
CLI Reference Guide:
• PIM-SM Commands