Filter
Top Products
Configuring Routing 495
Creating an OSPF Route Redistribution Source
When no redistributions are configured, the system displays only Create in the Configured Source field
and possible sources in the Available Source fields. When you select an Available Source, enter
configuration data, and click Apply Changes, the item displays in the Configure Source drop-down list
and is removed from the Available Source drop-down list.
1.
Open the
OSPF Route Redistribution Configuration
page.
2.
Specify
Create
in the Configured Source field.
3.
Select Static, Connected, or RIP from the Available Source field.
4.
Click
Apply Changes
when finished.
The route redistribution data is configured, and the device is updated.
Modifying OSPF Route Redistribution Data
1.
Open the
OSPF Route Redistribution Configuration
page.
2.
Select a source from the Configured Source drop-down.
3.
Enter data in the fields as needed.
4.
Click
Apply Changes
when finished.
The route redistrbution data is configured, and the device is updated.
Configuring OSPF Route Redistribution Data using CLI Command
For information about the CLI command that performs this function, see the following chapter in the
CLI Reference Guide:
• OSPF Commands