Filter
Top Products
Configuring Routing 517
RIP Route Redistribution Summary
Use the RIP Route Redistribution Summary
page to display Route Redistribution configurations.
To display the page, click Routing > RIP > Route Redistribution Summary in the tree view.
Figure 9-32. RIP Route Redistribution Summary
The RIP Route Redistribution Summary page contains the following fields:
•
Source
— The source route to be redistributed by RIP.
•
Metric
— The metric of redistributed routes for the given source route. Displays 0 when not
configured.
• Redistribute — Shows whether route redistribution is enabled for the source.
•
Distribute Lis
t — The access list that filters the routes to be redistributed by the destination protocol.
If the distribute list is not configured, the field is blank.
• Match — Shows the list of routes redistributed when OSPF is selected as the source, which can be any
of the following:
–
Match Internal
— Shows whether redistribution of OSPF internal routes is enabled.
–
Match External Type 1
— Shows whether the redistribution of OSPF external type 1 routes is
enabled.
–
Match External Type 2
— Shows whether the redistribution of OSPF external type 2 routes is
enabled.
–
Match NSSA External Type 1
— Shows whether the redistribution of OSPF NSSA external type 1
routes is enabled.
–
Match NSSA External Type 2
— Shows whether the redistribution of OSPF NSSA external type 2
routes is enabled.