Filter
Top Products
430 Viewing Statistics and Remote Monitoring
Viewing Interface Utilization Statistics Using the CLI Command
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• RMON Commands
Counter Summary
Use the
Counter Summary
page to display interface utilization statistics in numeric sums as opposed to
percentages.
To display the page, click Statistics/RMON > Table Vie ws > Counter Summary in the tree view.
Figure 8-6. Counter Summary
The Counter Summary page contains the following fields:
•
Unit
— Specifies the unit for which statistics are displayed.
•
Refresh Rate
— Specifies amount of time that passes before statistics are refreshed. The possible field
values are No Refresh, 15, 30, and 60 seconds. Default is No Refresh.
•
Interface
— Specifies the interface for which statistics are displayed.
•
Interface Status
— Displays status of the interface.
•
Received Unicast Packets
— Displays number of received Unicast packets on the interface.
•
Transmit Unicast Packets
— Displays number of transmitted Unicast packets from the interface.
•
Received Non Unicast Packets
— Displays number of received non-Unicast packets on the interface.
•
Transmit Non Unicast Packets
— Displays number of transmitted non-Unicast packets from the
interface.