Filter
Top Products
624 Configuring Quality of Service
Changing Diffserv Admin Mode
1.
Open the
Diffserv Configuration
page.
2.
Tu r n
Diffserv Admin Mode
on or off by selecting Enable or Disable from the drop-down menu.
3.
Click
Apply Changes
.
The Diffserv Admin Mode is changed, and the device is updated.
Displaying MIB Tables Using the CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• QoS Commands
Class Configuration
Use the
Diffserv Class Configuration page to add a new Diffserv class name, or to rename or delete an
existing class.
To displ ay t he
page, click Quality of Service > Differentiated Services > Class Configuration in the
tree view.
Figure 11-2. Diffserv Class Configuration
The Diffserv Class Configuration page contains the following fields:
•
Class Name
— Selects a class name to rename or delete. Click
Add
to set up a new class name.
•
Rename
— Renames the class displayed
when the box is checked and a new name is entered.
•
Class Type
— Lists the class types. Currently the hardware supports only the
Class Type
value
All
.