Filter
Top Products
Configuring IPv6 605
OSPFv3 Link State Database
Use the OSPFv3 Link State Database
page to display the link state and external LSA databases. The
OSPFv3 Link State Database
page has been updated to display external LSDB table information in
addition to OSPFv3 link state information.
To display the page, click IPv6 > OSPFv3 > Link State Database in the tree view.
Figure 10-27. OSPFv3 Link State Database
The OSPFv3 Link State Database page displays the following fields:
•
Adv. Router
— The 32-bit integer in dotted decimal format that uniquely identifies the router within
the autonomous system (AS). The Router ID is set on the OSPFv3 Configuration page.
•
Area ID
— The ID of an OSPF area to which one of the router interfaces is connected. An Area ID is a
32-bit integer in dotted decimal format that uniquely identifies the area to which an interface is
connected.
•
LSA Type
— The format and function of the link state advertisement. The types, which are defined in
RFC 2740 section A.4, can be any of the following:
–Router-LSA
– Network-LSA
– Inter-Area-Prefix-LSA
– Inter-Area-Router-LSA
– AS-External-LSA
–Type-7-LSA
–Link-LSA
– Intra-Area-Prefix-LSA
•
Link ID
— The Link State ID identifies the piece of the routing domain that is being described by the
advertisement. The value of the LS ID depends on the advertisement's LS type.