Filter
Top Products
Configuring Switching Information 305
•
Interface
— Displays the port number.
Defining the Aging Time
1.
Open the
Dynamic Address Table
page.
2.
Define the
Address Aging
field.
3.
Click
Apply Changes
.
The aging time is modified, and the device is updated.
Querying the Dynamic Address Table
1.
Open the
Dynamic Address Table
page.
2.
Define the parameter by which to query the
Dynamic Address Table
.
Entries can be queried by
Interface
,
LAG
,
MAC Address
, or
VLAN ID
.
3.
Click
Query
to query the Dynamic Address Table.
Removing Data From the Dynamic Address Table
1.
Open the
Dynamic Address Table
page.
2.
Check
Clear Table
.
3.
Click
Apply Changes
.
The
Dynamic Address Table is cleared of all data.
Querying and Sorting Dynamic Addresses Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• Address Table Commands
Configuring GARP
Generic Attribute Registration Protocol (GARP) is a general-purpose protocol that registers any network
connectivity or membership-style information. GARP defines a set of switches interested in a given
network attribute, such as VLAN or multicast address. The GARP Timers page is accessible from the
GARP menu page.
To displ ay t he GARP
menu page, click Switching > GARP in the tree view.
GARP Timers
The GARP Timers page contains fields for enabling GARP on the switch.
To displ ay t he GARP Timers page, click Switching > GARP > GARP Timers in the tree view.