Filter
Top Products
358 Configuring Switching Information
Figure 7-75. Add Bridge Multicast Group
3.
Select the
VLAN ID
from the drop-down menu.
4.
Define the
New Bridge Multicast
IP or MAC
address.
5.
In the
Bridge Multicast Group
tables, assign a setting by clicking in the
Static
row for a specific
port/LAG. Each click toggles between S, F, and blank. (not a member).
6.
Click
Apply Changes
.
The bridge multicast address is assigned to the multicast group, ports/LAGs are assigned to the group
(with the
Current
rows being updated with the
Static
settings), and the device is updated.
Assigning an Interface to an existing Multicast Group
1.
Open the
Bridge Multicast Group
page.
2.
Select the
VLAN ID
from the drop-down menu.
The associated
Bridge Multicast Address
displays.
3.
In the
Bridge Multicast Group
tables, assign a setting by clicking in the
Static
row for a specific
port/LAG. Each click toggles between S, F, and blank (not a member).
4.
Click
Apply Changes
.
The interface is assigned to the multicast group, the
Current
row is updated with the
Static
setting,
and the device is updated.