Dell M8024 Network Card User Manual


 
Introduction 17
Software Download
Software download enables storage of backup firmware images. For information about downloading the
software, see "Software Download and Reboot
.
"
Trivial File Transfer Protocol (TFTP)
The PowerConnect M6220/M6348/M8024 switches support boot image, firmware, and configuration
upload or download through TFTP.
Remote Monitoring (RMON)
RMON is a standard Management Information Base (MIB) that defines current and historical MAC-
layer statistics and control objects, allowing real-time information to be captured across the entire
network.
Simple Network Management Protocol (SNMP) Versions 1, 2, and 3
The system is fully manageable using a combination of MIB variables, whose combined values represent
all facets of the system state, and the SNMP protocol to examine and possibly modify these values.
SNMP v1/v2c/v3 over the UDP/IP transport protocol is supported.
Command Line Interface
Command Line Interface (CLI) syntax and semantics conform as much as possible to common industry
practice. CLI is composed of mandatory and optional elements. Context-sensitive help provides format
and value ranges allowed for current commands, and the CLI interpreter provides command and
keyword completion.
Syslog
Syslog is a protocol that allows event notifications to be sent to a set of desired remote servers where they
can be stored, examined, and acted upon.
For information about Syslog, see "Managing Logs."
SNTP
The Simple Network Time Protocol (SNTP) assures accurate network switch clock time synchronization
up to the millisecond. Time synchronization is performed by a network SNTP server.
For more information about SNTP, see "Configuring SNTP Settings."
Simple Mode
Users with a privilege level of 15 can configure the switch to operate in normal mode or simple mode. By
default, the switch operates in normal mode. When the PowerConnect M6220/M6348/M8024 Series is
operating in simple mode, a limited number of features are available to configure. For features that are
not available in simple mode, their administrative Web pages and CLI commands are unavailable.
For more information about Simple Mode, see "Setting the Operational Mode."