Filter
Top Products
Configuring Switching Information 381
The LLDP Statistics page displays the following statistics:
System-wide Statistics
•
Last Update
— Displays the value of system up time the last time a remote data entry was created,
modified, or deleted.
•
Total Inserts
— Displays the number of times a complete set of information advertised by a remote
switch has been inserted into the table.
•
Total Deletes
— Displays the number of times a complete set of information advertised by a remote
switch has been deleted from the table.
•
Total Drops
— Displays the number of times a complete set of information advertised by a remote
switch could not be inserted due to insufficient resources.
•
Total Ageouts
— Displays the number of times any remote data entry has been deleted due to TTL
(Time-to-Live) expiration.
Port Statistics
•
Interface
— Displays the Unit and Port to which the statistics on that line apply.
•
Transmit Total
— Displays the total number of LLDP frames transmitted on the indicated port.
•
Receive Total
— Displays the total number of valid LLDP frames received on the indicated port.
•
Discards
— Displays the number of LLDP frames received on the indicated port and discarded for any
reason.
•
Errors —
Displays the number of invalid LLDP frames received on the indicated port.
•
Ageouts
— Displays the number of times a remote data entry on the indicated port has been deleted
due to TTL expiration.
•
TLV Discards
— Displays the number of LLDP TLVs (Type, Length, Value sets) received on the
indicated port and discarded for any reason by the LLDP agent.
•
TLV Unknowns
— Displays the number of LLDP TLVs received on the indicated port for a type not
recognized by the LLDP agent.
Use the Unit drop-down menu to view the LLDP Statistics for other units in the stack, if they exist.
Use the Clear Statistics button to reset all LLDP Statistics to zero.
Displaying LLDP Statistics with the CLI Command
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• LLDP Commands