Filter
Top Products
720 Configuring IP Multicast
•
CBSR Hash Mask Length
— Enter the CBSR hash mask length to be advertised in bootstrap
messages if this interface is elected as the bootstrap router. This hash mask length is used in the hash
algorithm for selecting the RP for a particular group. The valid values are from 0 to 32. The default
value is 30.
•
CRP Preference
— Enter the preference value for the local interface as a candidate bootstrap router.
The value of -1 is used to indicate that the local interface is not a candidate BSR interface. The valid
values are from -1 to 255. The default value is 0.
Configuring PIM-SM for an Interface
1.
Open the
PIM-SM Interface Configuration
page.
2.
Select the interface to configure from the
Interface
field.
3.
Select
Enable
from the
Mode
field.
4.
Modify the remaining fields as needed.
5.
Click
Apply Changes
.
The interface configuration is saved, and the device is updated.
Configuring PIM-SM for an Interface using the CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• PIM-SM Commands