Filter
Top Products
Configuring IPv6 571
The DHCPv6 Global Configuration page contains the following fields:
•
DHCPv6 Admin Mode
— Specifies DHCPv6 operation on the switch. Possible values are Enable and
Disable; the default value is Disable.
•
Relay Option
— Specifies Relay Agent Information Option value. The values allowed are between 32
to 65535, and represent the value exchanged between the relay agent and the server. Each value has a
different meaning, of which 1 to 39 are standardized. The default value, 32, means
OPTION_INFORMATION_REFRESH_TIME.
•
Remote-id Sub-option
— Lets you specify a number to represent the Relay Agent Information Option
Remote-ID Sub-option type. The values allowed are between 1 and 65535. The default value is 1.
Configuring DHCPv6 Global Parameters
1.
Open the
DHCPv6 Global Configuration
page.
2.
Modify the fields as needed.
3.
Click
Apply Changes
.
The DHCPv6 parameter modifications are saved, and the device is updated.
Configuring DHCPv6 Global Parameters using the CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• DHCPv6 Commands