Filter
Top Products
Configuring Switching Information 267
Viewing the Port Security Table
1.
Open the
Port Security
page.
2.
Click
Show All.
The
Port Security Table
displays.
Figure 7-5. Port Security Table
3.
Use the
Unit
drop-down menu to view the
Port Security Table
for other units in the stack, if they exist.
Defining Multiple Locked Ports
1.
Open the
Port Security
page.
2.
Click
Show All.
The
Port Security Table
displays.
3.
Click
Edit
for each port whose parameters are to be changed.
4.
Fields can now be edited as needed for these ports.
5.
Click
Apply Changes
.
The changes are made to the Port Security table, and the device is updated.
Configuring Port Security with CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• Address Table Commands
IP ACL Configuration
Access control lists (ACL) allow network managers to define classification actions and rules for specific
ingress ports. Your switch supports up to 100 ACLs. However, the hardware resources are limited and may
not be able to fully support 100 completely populated ACLs.