Filter
Top Products
520 Configuring Routing
Configuring Router Discovery
1.
Open the
Router Discovery Configuration
page.
2.
Select the router interface to be configured.
3.
Configure data as needed for the remaining fields.
4.
Click
Apply Changes
Specified configuration changes are saved, and the device is updated.
Configuring Router Discovery using the CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• Router Discovery Protocol Commands
Router Discovery Status
Use the Router Discovery Status
page to display Router Discovery data for each port.
To display the page, click Routing > Router Discovery > Status in the tree view.
Figure 9-34. Router Discovery Status