Filter
Top Products
Configuring Routing 555
Removing a Loopback
1.
Open the
Loopback Configuration
page.
2.
Specify the loopback to remove in the
Loopback
drop-down menu.
3.
Click
Delete Loopback
.
The loopback is deleted, and the device is updated.
Removing a Secondary Address
1.
Open the
Loopback Configuration
page.
2.
Specify the loopback to be affected.
3.
Specify the secondary address to be removed.
4.
Click
Delete Selected Secondary
.
The secondary address is deleted, and the device is updated.
Configuring a Loopback using CLI Commands
For information about the CLI commands that perform this function, see the following chapters in the
CLI Reference Guide:
• Loopback Interface Commands
• IP Addressing Commands
• IPv6 Routing Commands