Filter
Top Products
Configuring Switching Information 265
Changing Administrative Port Control
1.
Open the
Dot1x Authentication
page.
2.
Click
Show All
.
The
Dot1x Authentication
Tab l e
displays.
3.
Scroll to the right side of the table and select the
Edit
check box for each port to configure. Change
Admin Port Control
to
Authorized
,
Unauthorized
, or
Automode
as needed for chosen ports. Only
MAC-Based
and
Automode
actually uses dot1x to authenticate.
Authorized
and
Unauthorized
are
manual overrides.
4.
Click
Apply Changes
.
Admin Port Control is updated for the specified ports, and the device is updated.
Enabling Dot1x Authentication Using the CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• 802.1X Commands
Authenticated Users
The Authenticated Users page is used to display lists of ports that have authenticated users.
To display the Authenticated Users page, click Switching > Network Security > Authenticated Users in
the tree view.
Figure 7-3. Network Security Authenticated Users
The Authenticated Users page contains the following fields:
•
Port
— Displays the port used for authentication.
•
User Name
— Specifies a user from the list of users authorized via the RADIUS Server.