Filter
Top Products
XG2000 series User's Guide
131/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
z Protocol
The control protocol utilized by the link aggregation group is displayed.
− None
A static link aggregation group.
− LACP - Active
Uses LACP as the control protocol for link aggregation in Active mode.
− LACP - Passive
Uses LACP as the control protocol for link aggregation in Passive mode.
z Distribution algorithm
Displays the distribution method for frame forwarding across the aggregated ports.
− Destination address
This is a distribution method based on the destination MAC address of a frame.
− Source address
This is a distribution method based on the transmitted frame MAC address.
− Destination address & Source address
This is a distribution method based on the information of the destination MAC address
of a frame and the transmitted frame MAC address.
− Vlan
This is a distribution method based on the VLAN membership of a frame.
− IP Hash
This is a distribution method based on the following frame information.
− Destination IP
Frames are distributed based on destination IP address.
− Source IP
Frames are distributed based on source IP address.
− Destination port
Frames are distributed based on destination TCP/UDP port.
− Source port
Frames are distributed based on source TCP/UDP port.
z Distribution parameter
Displays the parameter used to calculate the distribution of frames.
z The minimum number of ports
Displays the port minimum number of ports that must be in a link up required to maintain
a link up state for the aggregation group.
Static link aggregation specific information
The state of each port belonging to a static link aggregation group is then listed.
[port 1]
Indicates the port number being displayed.
z Port Status
The status of the port is displayed.
− Active
The port is usable.
− Inactive
The port is not usable.