Filter
Top Products
XG2000 series User's Guide
185/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
5.14 Port Mirroring Setup Commands
This section explains the configuration commands for port mirroring.
5.14.1 show mirror
Function
Displays the current mirroring configuration for send and receive frames.
Prompt
xg> or xg#
Command syntax
show mirror
Command type
Operation management command
Output form
xg# show mirror
Mirror Information 2007/01/22-12:12:15
===============================================================================
Monitored Port Rx Mirroring Port
-------------- -----------------
Port-1 ===> Port-2
Monitored Port Tx Mirroring Port
-------------- -----------------
Port-1 ===> Port-3
===============================================================================
z Monitored Port
Displays the port number of the monitored switch.
z Rx Mirroring Port
Displays the destination port number for mirroring of frames received at the monitored port.
z Tx Mirroring Port
Displays the destination port number for mirroring of frames sent from the monitored port.
Example
Display the port mirroring status.
xg> show mirror