Filter
Top Products
XG2000 series User's Guide
225/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
5.16.12 show statistics framesize-traffic-counts
Function
Displays traffic statistics for each port in different frame size groups.
Prompt
xg> or xg#
Command syntax
show statistics framesize-traffic-counts
Command type
Operation management command
Output form
xg# show statistics framesize-traffic-counts
Framesize Traffic Statistics(Total Frame Counts) 2007/01/22-19:44:11
=====================================================================
[No.1]
Port : 1
Link State/ STP State: Up/Forward
FrameSize 0-64 : 805
FrameSize 65-127 : 0
FrameSize 128-255 : 0
FrameSize 256-511 : 0
FrameSize 512-1023 : 0
FrameSize 1024-1518 : 0
Port-Description : port_name1
[No.2]
z [No.]
Displays statistics for each port.
z Port
Displays the port numbers.
z Link State/STP State
Displays the port state in the Link State or STP State format.
The Link State may indicate one of the following link states.
− Down
The port link is down.
− Up
The port link is up.
The STP State displays the current port status based on the STP (Spanning Tree Protocol).
Note that the STP State is not displayed if the Link State is down.
For port status details, see “Spanning Tree Protocol Port States
”.
z FrameSize 0-64
Displays the accumulated number of 64-byte frames sent or received at each port after the
system startup.
z FrameSize 65-127
Displays the accumulated number of 65- to 127-byte frames sent or received at each port after
the system startup.
z FrameSize 128-255
Displays the accumulated number of 128- to 255-byte frames sent or received at each port
after the system startup.
z FrameSize 256-511
Displays the accumulated number of 256- to 511-byte frames sent or received at each port
after the system startup.
z FrameSize 512-1023
Displays the accumulated number of 512- to 1023-byte frames sent or received at each port
after the system startup.
z FrameSize 1024-1518
Displays the accumulated number of 1024- to 1518-byte frames sent or received at each port
after the system startup.
z Port-Description
Displays port descriptions. If the port is not described, it will not display anything.
Up to 44 characters can be displayed.