Filter
Top Products
XG2000 series User's Guide
292/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
A.2.5 clim (Basic CLI Control: 3300-3999)
Message ID
Severity
Message/Explanation/Solution
P3300
INFO
cmd-exec[startup]: %1$
Explanation
The command in the startup-config was executed.
z [[Inserted string]]%1$: Command string executed in the startup-config.
P3301
INFO
cmd-result[startup]: success
Explanation
The command in the startup-config was successfully completed.
P3302
INFO
cmd-result[startup]: error
Explanation
The command in the startup-config failed.
P3303
INFO
startup-config start.
Explanation
Starts startup-config file processing.
P3304
INFO
startup-config end.
Explanation
Startup-config file processing was successfully completed.
P3305
INFO
Line has connected. line-ID=%1$
Explanation
The telnet or SSH terminal was connected.
z [[Inserted string]]%1$: Terminal ID
P3306
INFO
startup-config end(none).
Explanation
The startup-config file was not found.
P3307
INFO
startup-config end(error).
Explanation
Startup-config file processing failed.
P3308
INFO
cmd-result[startup]: skip
Explanation
Since the attempt to execute the previous command in startup-config resulted in an error, execution of the next
command was skipped.
P3309
INFO
Line has disconnected. line-ID=%1$
Explanation
The telnet or SSH terminal was disconnected.
z [[Inserted string]]%1$: Terminal ID
P3310
WARNING
Cannot find host %1$.
Explanation
Failed to find an IP address for the host name specified with the "log send" command.
z [[Inserted string]]%1$: Host name specified with the "log send" command
Solution
Review the host name defined.
Check that DNS was configured.