Filter
Top Products
XG2000 series User's Guide
232/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
5.16.19 clear statistics
Function
Clears all statistics stored since system startup.
The following statistics are cleared.
z Traffic statistics: traffic-bytes, traffic-counts and framesize-traffic-counts
z QoS traffic statistics: qos-priority-traffic-bytes and qos-priority-traffic-counts
z VLAN traffic statistics: vlan-traffic-bytes and vlan-traffic-counts
z Data flow statistics: dataflow
z Error traffic statistics: error
Prompt
xg#
Command syntax
clear statistics
Command type
Operation management command
Note
z If this command is issued during execution of the “monitor” command in “current” mode, the “monitor” command may
temporarily display incorrect statistics. If this occurs, reissue the “monitor” command. The “monitor” command will then
display the correct statistics.
Example
Clear all statistics stored since system startup.
xg# clear statistics