Filter
Top Products
XG2000 series User's Guide
229/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
5.16.16 show statistics vlan-traffic-counts
Function
Displays the traffic (the number of frames) for each VLAN after system startup.
Prompt
xg> or xg#
Command syntax
show statistics vlan-traffic-counts
Command type
Operation management command
Output form
xg# show statistics vlan-traffic-counts
VLAN Traffic Statistics(Total Frame Counts) 2007/01/22-19:58:31
================================================================
[No.1]
VID : 40
Rx-Frame Counts
: 0
Rx-NonUcast Counts: 0
[No.2]
z [No.]
Displays statistics for each VLAN.
z VID
Displays the VID of the VLAN set for statistics collection.
Specify the VLAN for statistics collection using the "vlan-statistics collection" command.
z Rx-Frame Counts
Displays the accumulated count of frames received at the specified VLAN (after the system
startup), using a 10-digit, right-justified value.
z Rx-NonUcast Counts
Displays the accumulated count of non-unicast frames received at the specified VLAN after
the system startup, using a 10-digit, right-justified value.