Filter
Top Products
XG2000 series User's Guide
287/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
Message ID
Severity
Message/Explanation/Solution
S2217
WARNING
Too Many Input Queue Tag Memory SBE Errors. LOG Disabled.
Explanation
A correctable error was repeatedly detected in the switch chip. Logging for this event is disabled.
Solution
Note the message contents and contact the sales representative.
S2218
WARNING
MAC address learning failed.
Explanation
Failed to learn the MAC address.
Solution
Delete the unused static MAC address. Since MAC addresses are managed with a hashing algorithm, a
message stating the address cannot be registered may be displayed even though the number of addresses
registered is less than the number that can be registered. If the message is displayed even though no static
MAC address is unregistered, note the message contents and contact the sales representative.
S2219
WARNING
Drop Queue SBE detected. %1$
Explanation
A correctable error was detected in the switch chip. It is automatically corrected by hardware.
z [[Inserted string]]%1$: Supplementary code for the error
Solution
If the same message reappears after restarting the switch, note the message contents and contact the sales
representative.
S2220
WARNING
Too Many Drop Queue SBE Errors. LOG Disabled.
Explanation
A correctable error was repeatedly detected in the switch chip. Logging for this event is disabled.
Solution
Note the message contents and contact the sales representative.
S2221
WARNING
MAC Table SBE detected. %1$
Explanation
A correctable error was detected in the switch chip. It is automatically corrected by hardware.
z [[Inserted string]]%1$: Supplementary code for the error
Solution
If the same message reappears after restarting the switch, note the message contents and contact the sales
representative.
S2222
WARNING
Too Many MAC Table SBE Error. LOG Disabled.
Explanation
A correctable error was repeatedly detected in the switch chip. Logging for this event is disabled.
Solution
Note the message contents and contact the sales representative.
S2223
WARNING
Multicast State Table SBE detected. %1$
Explanation
A correctable error was detected in the switch chip. It is automatically corrected by hardware.
z [[Inserted string]]%1$: Supplementary code for the error
Solution
If the same message reappears after restarting the switch, note the message contents and contact the sales
representative.
S2224
WARNING
Too Many MST SBE Errors. LOG Disabled.
Explanation
A correctable error was repeatedly detected in the switch chip. Logging for this event is disabled.
Solution
Note the message contents and contact the sales representative.
S2225
WARNING
CM Buffer SBE detected. %1$
Explanation
A correctable error was detected in the switch chip. It is automatically corrected by hardware.
z [[Inserted string]]%1$: Supplementary code for the error
Solution
If the same message reappears after restarting the switch, note the message contents and contact the sales
representative.