Filter
Top Products
XG2000 series User's Guide
217/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
5.16.6 monitor vlan-traffic-bytes
Function
Displays the received byte count of each VLAN.
Prompt
xg> or xg#
Command syntax
monitor vlan-traffic-bytes { current | total } [interval <3-60>]
Parameter
z { current | total }
Specifies the statistics to be displayed.
− current
Displays the accumulated byte count of received frames for each VLAN after startup
of this command.
− total
Displays the accumulated byte count of received frames for each VLAN after the system
startup.
z interval <3-60>
Specifies the update interval (in seconds).
The default interval is 3 seconds.
Command type
Operation management command
Output form (if "current" is specified)
xg# monitor vlan-traffic-bytes current
VLAN Traffic Statistics(Current Frame Bytes) 2007/01/22-12:12:15
================================================================
VID Rx-Frame Rx-NonUcast
Bytes Bytes
---- ----------- ------------
1 1234567890 1234567890
10
0 0
20 1234567890K 1234567889K
30 25690M 25690M
40 25690G 25690G
4094
0 0
================================================================
ESC:exit F:refresh
U:page up D:page down L:page left R:page right
z VID
Displays the VID of the VLAN set for statistics collection. Statistics of each VLAN are
displayed on one line.
Specify the VLAN to collect its statistics using the "vlan-statistics collection" command.
z Rx-Frame Bytes
Displays the accumulated byte count of frames received at the specified VLAN after the startup
of this command, using a 10-digit, right-justified value.
z Rx-NonUcast Bytes
Displays the accumulated byte count of multicast or broadcast frames received at the specified
VLAN after the startup of this command, using a 10-digit, right-justified value.
Output form (if "total" is specified)
xg# monitor qos-priority-traffic-bytes total
VLAN Traffic Statistics(Total Frame Bytes) 2007/01/22-12:12:15
==============================================================
VID Rx-Frame Rx-NonUcast
Bytes Bytes
---- ----------- ------------
1
1234567890 1234567890
10 0 0
20 1234567890K
1234567889K
30 25690M 25690M
40 25690G 25690G
4094
0 0
==============================================================
ESC:exit F:refresh
U:page up D:page down L:page left R:page right
The bytes displayed in the “Bytes” column are the ones accumulated after the system startup. Other values are the same as
those displayed if the “current” option were specified.