Filter
Top Products
XG2000 series User's Guide
189/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
Output form (if “mrouter” is specified)
Only the multicast router information is extracted from the IGMP snooping information and displayed.
xg# show ip snooping mrouter
IGMP Snooping Information(Multicast Router) 2005/04/24-22:19:52
===============================================================================
Vlan Type Mrouter ports
---- ------- -------------
1 static port 5
2 dynamic port 6
----------------------------------------------------------------------------
===============================================================================
Output form (if “group” is specified)
Only the multicast group information is extracted from the IGMP snooping information and displayed.
xg# show ip snooping group
IGMP Snooping Information(Multicast Group) 2005/04/24-22:20:56
===============================================================================
Vlan Multicast Group Ver Member ports
---- --------------- --- ---------------------------------------------------
1 225.0.0.1 2 port 1 5
2 225.0.0.2 2 port 1 5
----------------------------------------------------------------------------
===============================================================================
5.15.2 ip snooping protocol
Function
Enables global IGMP snooping.
Use the no form to disable the snooping.
Prompt
xg(config)#
Command syntax
ip snooping protocol igmp
no ip snooping protocol igmp
Parameter
z protocol igmp
Enables global IGMP snooping for the device.
Command type
Configuration command
Default
None
Message
% port %1$ is membership of uplink-domain %2$.
Explanation
The displayed port is used as an uplink.
[[Inserted string]]%1$: Port number
[[Inserted string]]%2$: Uplink domain number
Solution
Clear the uplink domain before enabling IGMP snooping.
Note
z IGMP snooping and the uplink filter function cannot be used at the same time.
Example
Enable IGMP snooping of the device.
xg(config)# ip snooping protocol igmp