Filter
Top Products
XG2000 series User's Guide
161/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
5.11.2 spanning-tree
Function
Enables the Spanning Tree Protocol (STP).
Use the no form to disable Spanning Tree Protocol.
Prompt
xg(config)#
Command syntax
spanning-tree
no spanning-tree
Command type
Configuration command
Default
None
Message
% port %1$ is membership of uplink-domain %2$.
Explanation
The specified port already belongs to an uplink domain.
[[Inserted string]]%1$: specified port number
[[Inserted string]]%2$: uplink domain number
Solution
Specify a port not belonging to an uplink domain or remove the port from an uplink domain.
Note
z STP cannot be used on uplink ports. STP port fast, however, is allowed on uplink ports.
Example
Enable Spanning Tree Protocol.
xg(config)# spanning-tree