Filter
Top Products
XG2000 series User's Guide
294/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
Message ID
Severity
Message/Explanation/Solution
P4508
WARNING
Invalid "Max age" relationship 2*(%1$ + 1) <= %2$.
Explanation
The setting of STP Max Age is invalid.
z [[Inserted string]]%1$: The current Hello Time value
z [[Inserted string]]%2$: Attempted Max Age value change
Solution
Check that the setting of Max Age satisfies the following condition.
Max Age ≥ 2 x (Hello Time + 1)
P4509
WARNING
Invalid "Hello time" relationship 2*(%1$ + 1) <= %2$.
Explanation
The setting of Hello Time is invalid.
z [[Inserted string]]%1$: Attempted Hello Time value change
z [[Inserted string]]%2$: The current Max Age value
Solution
Check that the setting of Hello Time satisfies the following condition.
Max Age ≥ 2 x (Hello Time + 1)
A.2.8 lacp (LACP Control: 5000-5499)
Message ID
Severity
Message/Explanation/Solution
P5001
WARNING
%1$ detects loopback packet.
Explanation
Ports being members of the same link aggregation group are connected.
z [[Inserted string]]%1$: Port information
Solution
Review the connection between port being members of the link aggregation.
A.2.9 sys (Maintenance Support Function: 7400-7499)
Message ID
Severity
Message/Explanation/Solution
P7400
INFO
Dump configuration succeeded.
Explanation
The maintenance support function was successfully initialized.
S7410
WARNING
Could not save a system-dump file.
Explanation
An error occurred while storing the system dump file.
Solution
Note the message contents and contact the sales representative.
S7411
ERROR
Could not execute system-dump.
Explanation
An error occurred while storing the system dump file.
Solution
Note the message contents and contact the sales representative.
S7490
CRITICAL
A system-dump has been saved. Cause: critical system error occurred.
Explanation
An error occurred while storing the system dump file.
Solution
Obtain maintenance information using the "tftp put-maintenance
" or "scp put-maintenance" command then take
note of the message content before contacting the sales representative.
S7491
CRITICAL
A system-dump has been saved. Cause: dump switch was pressed.
Explanation
As the Dump switch was pressed, the system dump was saved.
Solution
Obtain maintenance information using the "tftp put-maintenance
" or "scp put-maintenance" command then take
note of the message content before contacting the sales representative.