Filter
Top Products
XG2000 series User's Guide
132/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
Output form (in case of LACP link aggregation)
xg# show link-aggregation
Link Aggregation Information 2005/04/24-16:16:36
===============================================================================
System Priority : 32768
System ID : 0080.17c2.05e2
-------------------------------------------------------------------------------
[agg-port 1]
Master port
: port <1-20>
Management packet send port : port <1-20>
Mac address
: 0080.17c2.2144
Protocol : { LACP - Active | LACP - Passive }
Distribution algorithm : { Destination address | Source address
| Destination address & Source address
| Vlan | IP Hash }
{ Destination IP | Source IP
| Destination port | Source port }
The minimum number of ports : 1
Actor System Key : 1
Partner System Priority : 32768
Partner System ID : 0080.17c2.05e2
Partner Key : 2
[port 1]
Port Status
: {Active | Inactive }
Port Priority : 32768
Synchro State : { Sync | No Sync }
Receive State
: { Invalid | Initialize | Port Disabled | LACP Disabled| Expired
| Defaulted| Current}
Periodic Tx State : { Invalid | No Periodic | Fast Periodic | Slow Periodic }
Actor System Key
: 1
Partner System Priority : 32768
Partner System ID : 0080.17c2.05e2
Partner Key : 2
Partner Port Priority
: 32768
Partner Port Number : 10011
Partner Synchro State
: { Sync | No Sync }
[port 2]
Port Status : { Active | Inactive }
Port Priority
: 32768
Synchro State : { Sync | No Sync }
Receive State : { Invalid | Initialize | Port Disabled | LACP Disabled | Expired
| Defaulted| Current}
Periodic Tx State
: { No Periodic | Fast Periodic | Slow Periodic }
Actor System Key
: 1
Partner System Priority : 32768
Partner System ID : 0080.17c2.05e2
Partner Key : 2
Partner Port Priority
: 32768
Partner Port Number : 11
Partner Synchro State
: { Sync | No Sync }
[agg-port 2]
===============================================================================
Link aggregation common information
Link aggregation information related to the switch in general will be displayed. The display content is the same as the case of a
static link aggregation group.
LACP Link aggregation specific information
Items common to each aggregation group that will be displayed.
z Actor System Key
The system key used by LACP is displayed.
z Partner System Priority
LACP system priority will be displayed. This system priority is from the device which is
connected by LACP shown in this command.
z Partner System ID
LACP system ID will be displayed. This system priority is from the device which is connected
by LACP shown in this command.
z Partner System Key
LACP system key will be displayed. This system priority is from the device which is connected
by LACP shown in this command.
The state of each port belonging to an LACP link aggregation group is then listed.
[port 1]
Indicates the port number being displayed.
z Port Priority
The status of the port is displayed.
− Active
The port is usable.
− Inactive
The port is not usable.