Filter
Top Products
XG2000 series User's Guide
187/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
5.15 IGMP Snooping Setup Commands
This section explains the IGMP snooping configuration commands.
5.15.1 show ip snooping
Function
Displays the IGMP snooping configuration.
Prompt
xg> or xg#
Command syntax
show ip snooping [vlan <1-4094> ]
show ip snooping mrouter [vlan <1-4094>]
show ip snooping group [vlan <1-4094>]
Parameter
z [vlan <1-4094>]
Displays the IGMP snooping configuration for the specified VLAN.
If this parameter is omitted, all of the VLANs configuration information is displayed.
z mrouter [vlan <1-4094>]
Displays only the multicast router information for the IGMP snooping configuration.
If "vlan" is omitted, all of the VLANs’ configuration information is displayed.
z group [vlan <1-4094>]
Displays only the registered multicast group information for the IGMP snooping configuration.
If "vlan" is omitted, all of the VLANs’ configuration information is displayed.
Command type
Operation management command
Output form
xg# show ip snooping
IGMP Snooping Information 2007/01/22-22:17:04
===============================================================================
Global IGMP snooping : { Enabled | Disabled }
[vlan-1]
IGMP snooping : { Enabled | Disabled }
Registered group number : 0 (Current) / 32 (Maximum)
Multicast router auto learning: { Enabled | Disabled }
Fast leave : { Enabled | Disabled }
Group Membership interval : 260 (sec)
Last Member Query interval : 2 (sec)
Send Query count : 2 (times)
IGMP snooping querier : { Enabled | Disabled }
General Query interval : 125 (sec)
Querier IP address : 0.0.0.0
Multicast Router Information
----------------------------------------------------------------------------
Vlan Type Mrouter ports
---- ------- -------------
1 static port 5
----------------------------------------------------------------------------
Multicast Group Information
----------------------------------------------------------------------------
Vlan Multicast Group Ver Member ports
---- --------------- --- ---------------------------------------------------
1 225.10.10.1 2 port 1 5
------------------------------------------------------------------------------
[vlan-2]
z Global IGMP snooping
The operational state of IGMP snooping for the device is displayed.
− Enabled
IGMP snooping is enabled.
− Disabled
IGMP snooping is disabled.