Filter
Top Products
XG2000 series User's Guide
218/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
5.16.7 monitor vlan-traffic-counts
Function
Displays the received frame count of each VLAN.
Prompt
xg> or xg#
Command syntax
monitor vlan-traffic-counts { current | total } [interval <3-60>]
Parameter
z { current | total }
Specifies the statistics to be displayed.
− current
Displays the accumulated number of frames for each VLAN received after startup of this
command.
− total
Displays the accumulated number of frames for each VLAN received after the system
startup.
z interval <3-60>
Specifies the update interval (in seconds).
The default interval is 3 seconds.
Command type
Operation management command
Output form (if "current" is specified)
xg# monitor vlan-traffic-counts current
VLAN Traffic Statistics(Current Frame Counts) 2007/01/22-12:12:15
=================================================================
VID Rx-Frame Rx-NonUcast
Counts Counts
---- ----------- -----------
1 1234567890 1234567890
10 0
0
20 1234567890K 1234567890K
30 25690M
25690M
40 25690G 25690G
4094
0 0
=================================================================
ESC:exit F:refresh
U:page up D:page down L:page left R:page right
z VID
Displays the VID of the VLAN set for statistics collection. Statistics for each VLAN are
displayed on one line.
Specify the VLAN to collect its statistics using the "vlan-statistics collection" command.
z Rx-Frame Counts
Displays the accumulated number of frames received at the specified VLAN after the startup
of this command, using a 10-digit, right-justified value.
z Rx-NonUcast Counts
Displays the accumulated number of multicast or broadcast frames received at the specified
VLAN after the startup of this command, using a 10-digit, right-justified value.
Output form (if "total" is specified)
xg# monitor vlan-traffic-counts total
VLAN Traffic Statistics(Total Frame Counts) 2007/01/22-12:12:15
===============================================================
VID Rx-Frame Rx-NonUcast
Counts Counts
---- ----------- -----------
1
1234567890 1234567890
10 0 0
20 1234567890K 1234567890K
30 25690M 25690M
40 25690G 25690G
4094
0 0
===============================================================
ESC:exit F:refresh
U:page up D:page down L:page left R:page right
The values displayed in the “Counts” column are the ones accumulated after the system startup. Other values are the same as
those displayed if the “current” option were specified.