Filter
Top Products
XG2000 series User's Guide
228/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
5.16.15 show statistics vlan-traffic-bytes
Function
Displays the traffic (the number of bytes) for each VLAN after system startup.
Prompt
xg> or xg#
Command syntax
show statistics vlan-traffic-bytes
Command type
Operation management command
Output form
xg# show statistics vlan-traffic-bytes
VLAN Traffic Statistics(Total Frame Bytes) 2007/01/22-19:55:34
===============================================================
[No.1]
VID
: 40
Rx-Frame Byte
: 0
Rx-NonUcast Byte:
0
[No.2]
z [No.]
Displays statistics for each VLAN.
z VID
Displays the VID of the VLAN set for statistics collection.
Specify the VLAN for statistics collection using the "vlan-statistics collection" command.
z Rx-Frame Bytes
Displays the accumulated byte count of frames received at the specified VLAN (after the startup
of this command), using a 10-digit, right-justified value.
z Rx-NonUcast Bytes
Displays the accumulated byte count of multicast/broadcast frames received at the specified
VLAN after the startup of this command, using a 10-digit, right-justified value.