Fujitsu XG2000 Switch User Manual


 
XG2000 series User's Guide
3/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
About this Manual
This section describes target readers, contents, notations, etc. of this guide.
Target Readers and Required Knowledge
This guide was written for administrators, who are in charge of network construction, maintenance, and management.
To use this guide, the following knowledge is required.
z Basic knowledge of networks, the Internet, and intranets
z Basic knowledge of system security
This guide omits explanations of network protocol terms.
Contents
This guide to the XG2000 series is composed of the following chapters.
Chapter 1. Features and Functions
Describes the features and functions.
Chapter 2. Using the CLI
Describes operating environment of CLI and how to operate CLI.
Chapter 3. Installation
Describes the necessary installation procedures.
Chapter 4. Functions and Procedures for Setting Functions
Describes how to use the console screen.
Chapter 5. Command References
Describes how to use the commands.
Chapter 6. Managing the Device
Describes the management of the device.
Chapter 7. Troubleshooting
Describes how to solve problems in the device.
Appendix A. Event Logs
Describes the contents of messages reported by the device and actions to be taken for each
message.
Appendix B. SNMP Traps
Describes message format of SNMP traps.
Appendix C. List of MIBs
Describes the list of MIBs supported by the SNMP agent
Related Manuals
The following are XG2000 series related manuals. Use these manuals as necessary.
z XG2000 Series Hardware Guide
Describes the hardware of the XG2000 series.
Symbols Used in This Guide
The symbols used in this guide have the following meanings.
indicates useful information related to using the XG2000 series.
indicates precautions to take when using the XG2000 series.
indicates supplementary information.
indicates related matters such as operation procedures, etc.