Filter
Top Products
XG2000 series User's Guide
234/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
5.17.2 snmp-server location
Function
Sets the installation location for the device.
Use the no form to return to the default setup.
Prompt
xg(config)#
Command syntax
snmp-server location SYSTEM-LOCATION
no snmp-server location
Parameter
z SYSTEM-LOCATION
Specifies the installation location of the device. The location name can be up to 255
alphanumeric characters.
No need to enclose a parameter in quotes if it contains a blank space.
Command type
Configuration command
Default
None
Message
% SYSTEM-LOCATION is too long.
Explanation
The location name specified by SYSTEM-LOCATION exceeded the length limit.
Solution
Reduce the length of system location name and reissue the command.
% SYSTEM-LOCATION cannot be used.
Explanation
An illegal character was used in the SYSTEM-LOCATION name.
Solution
Review the system location name setting and reissue the command.
Example
Specify the system installation location as “3F West”:
xg(config)# snmp-server location 3F West