Filter
Top Products
XG2000 series User's Guide
211/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
5.16.3 monitor framesize-traffic-counts
Function
Displays a frame count and size range for frames which have been sent or received at each port.
Prompt
xg> or xg#
Command syntax
monitor framesize-traffic-counts { current | total } [interval <3-60>]
Parameter
z { current | total }
Specifies the statistics to be displayed.
− current
Displays the number of accumulated frames after startup of this command.
− total
Displays the number of accumulated frames after startup of the system.
z interval <3-60>
Specifies the update interval (in seconds).
The default interval is 3 seconds.
Command type
Operation management command
Output form (if "current" is specified)
xg# monitor framesize-traffic-counts current
Framesize Traffic Statistics(Current Frame Counts) 2007/01/22-12:12:15
===============================================================================>
Port Link State/ FrameSize FrameSize FrameSize FrameSize FrameSize
STP State 0-64 65-127 128-255 256-511 512-1023
---- --------- ---------- ---------- ----------- ----------- -----------
1 Up/Discard 1234567890K 1234567890K 1234567890K 1234567890K 1234567890K
2 Down 0
0 0 0 0
3 Up/Discard 1234567890K 1234567890K 1234567890K 1234567890K 1234567890K
4 Up/Learn 1234567890M 25690M 25690M 25690M 25690M
5 Up/Forward 1234567890G
25690G 25690G 25690G 25690G
6 Up/Forward 1234567890T 25690T 25690T 25690T 25690T
7 Down 0 0 0 0 0
8 Down 0
0 0 0 0
===============================================================================>
ESC:exit F:refresh
U:page up D:page down L:page left R:page right
(continues)
Framesize Traffic Statistics(Current Frame Counts) 2007/01/22-12:12:15
<==========================================================================
FrameSize Port-Description
1024-1518
----------- --------------------------------------------
1234567890K port_name1
0 port_name2
1234567890K port_name3
25690 port_name4
25690G port_name5
25690T port_name6
0 port_name7
0
<==========================================================================
ESC:exit F:refresh
U:page up D:page down L:page left R:page right
z Port
Displays the port numbers. Statistics for each port are displayed on one line.
z Link State/STP State
Displays the port state in the Link State or STP State format.
The Link State may indicate one of the following link states.
− Down
The port link is down.
− Up
The port link is up.
The STP State displays the current port status based on the STP (Spanning Tree Protocol).
Note that the STP State is not displayed if the Link State is down.
For port status details, see “Spanning Tree Protocol Port States
”.
z FrameSize 0-64
Displays the number of accumulated 64-byte frames sent or received after the command
execution.
z FrameSize 65-127
Displays the number of accumulated 65- to 127-byte frames sent or received after the command
execution.
z FrameSize 128-255
Displays the number of accumulated 128- to 255-byte frames sent or received after the command
execution.