Filter
Top Products
XG2000 series User's Guide
162/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
5.11.3 spanning-tree priority
Function
Sets the switch priority of the Spanning Tree Protocol.
Whichever switch priority is smallest is selected as the root switch for the Spanning Tree.
Use the no form to return to the default state.
Prompt
xg(config)#
Command syntax
spanning-tree priority <0-61440>
no spanning-tree priority
Parameter
z priority <0-61440>
Sets the switch priority value. It must be an integer divisible by 4096. Values can be set
in the range of 0 to 61440.
Command type
Configuration command.
Default
32768
Message
% Priority is not step of 4096
Explanation
The priority is not a multiple of 4096.
Solution
Specify an integer divisible by 4096.
Example
Set the switch priority to 4096.
xg(config)# spanning-tree priority 4096