Filter
Top Products
XG2000 series User's Guide
298/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
A.2.11 snmp (SNMP Control: 8500-8599)
Message ID
Severity
Message/Explanation/Solution
S8500
INFO
SNMP authentication failure.
Explanation
The device denied an SNMP request from a SNMP manager.
Solution
Review the SNMP permission from the SNMP manager using the "snmp access" command.
S8501
INFO
RMON alarm by rising-threshold.
index:%1$ OID:%2$ sample:%3$ value:%4$ rising-threshold:%5$
Explanation
The current sampled value was greater than the upper threshold defined by the "rmon alarm" command. A
SNMP trap for the corresponding RMON event was generated.
z [[Inserted string]]%1$: RMON alarm index
z [[Inserted string]]%2$: OID of MIB object to be monitored
z [[Inserted string]]%3$: Method of determining threshold
1: An absolute value is used when determining threshold (absolute)
2: The difference between the previous and current values is used when determining threshold (delta)
z [[Inserted string]]%4$: Value of MIB object to be monitored
z [[Inserted string]]%5$: Upper threshold of MIB object to be monitored
S8502
INFO
RMON alarm by falling-threshold.
index:%1$ OID:%2$ sample:%3$ value:%4$ falling-threshold:%5$
Explanation
The current sampled value was less than the lower threshold defined by the "rmon alarm" command, and a
SNMP trap for the corresponding RMON event was generated.
z [[Inserted string]]%1$: RMON alarm index
z [[Inserted string]]%2$: OID of MIB object to be monitored
z [[Inserted string]]%3$: Method of determining threshold
1: An absolute value is used when determining threshold (absolute)
2: The difference between the previous and current values is used when determining threshold (delta)
z [[Inserted string]]%4$: Value of MIB object to be monitored
z [[Inserted string]]%5$: Lower threshold of MIB object to be monitored
P8510
WARNING
Cannot find host %1$.
Explanation
Failed to find an IP address for the host name specified with the "snmp-server trap" command.
z [[Inserted string]]%1$: Host name specified with the "snmp-server trap" command
Solution
Review the host name defined. Check that DNS was configured.