Filter
Top Products
XG2000 series User's Guide
222/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
z Rx Align
Displays the accumulated number of 64- to 1518-byte alignment error frames whose bit size
is not a multiple of 8 received after startup of this command.
z Total Lost
Displays the accumulated number of frames received but discarded at each port after startup
of this command.
z Port-Description
Displays port descriptions. If the port is not described, it will not display anything.
Up to 31 characters can be displayed.
Output form (if "total" is specified)
xg# monitor error total
Error Statistics(Total Counts) 2007/01/22-12:12:15
==================================================================================>
Port Rx Rx & Tx Rx & Tx Rx & Tx Rx & Tx Rx Total
CRC Over Under Fragment Jabber Align Lost
---- -------- --------- --------- --------- --------- --------- ----------
1 1234567890 1234567890 1234567890 1234567890 1234567890 1234567890
1234567890
2 123 12 34 34 56 78 90
3
123 12 34 34 56 78 90
4 123 12 34 34 56 78 90
5 123 12 34 34 56 78 90
6
123 12 34 34 56 78 90
7 123 12 34 34 56 78 90
8 123 12 34 34 56 78 90
==================================================================================>
ESC:exit F:refresh
U:page up D:page down L:page left R:page right
(continues)
Error Statistics(Current Counts) 2007/01/22-12:12:15
<======================================================================
Port-Description
------------------------------------
port_name1
port_name2
port_name3
port_name4
port_name5
port_name6
port_name7
<=======================================================================
ESC:exit F:refresh
U:page up D:page down L:page left R:page right
The displayed values are the ones accumulated after the system startup. Other values are the same as those displayed if the
“current” option were specified.