Fujitsu XG2000 Switch User Manual


 
XG2000 series User's Guide
249/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
5.19.3 show optical-module sensor
Function
Displays the sensor values which is installed on the optical module.
Prompt
xg> or xg#
Command syntax
show optical-module sensor [ dbm ]
Parameter
z dbm
Display the strength of the laser in “dBm”.
When parameter is omitted, the strength will be displayed in “mW”
Command type
Operation management command
Output form (no parameter)
xg# show optical-module sensor
Optical Module Monitoring Data 2008/06/23-12:16:19
===================================================
[Tx power] [Rx power] [Temperature]
(mW) (mW) (degree C)
port 1 : 0.5221 0.5970 27.0
port 2 : 0.5392 0.4754 35.9
port 3 : 0.4524 0.3950 37.0
port 4 : 0.4150 0.4548 37.0
port 5 : (unmounted)
port 6 : (unmounted)
port 7 : (unmounted)
port 8 : (unmounted)
port 9 : (unmounted)
port 10 : (unmounted)
port 11 : (unmounted)
port 12 : (unmounted)
port 13 : (unmounted)
port 14 : (unmounted)
port 15 : (unmounted)
port 16 : (unmounted)
port 17 : (unmounted)
port 18 : (unmounted)
port 19 : (unmounted)
port 29 : (unmounted)
Output form (parameter is specified)
xg# show optical-module sensor dbm
Optical Module Monitoring Data 2008/06/23-12:16:19
===================================================
[Tx power] [Rx power] [Temperature]
(dBm) (dBm) (degree C)
port 1 : -2.837 -2.261 27.0
port 2 : -2.683 -3.224 35.9
port 3 : -3.456 -4.034 37.0
port 4 : -3.820 -3.422 37.0
port 5 : (unmounted)
port 6 : (unmounted)
port 7 : (unmounted)
port 8 : (unmounted)
port 9 : (unmounted)
port 10 : (unmounted)
port 11 : (unmounted)
port 12 : (unmounted)
port 13 : (unmounted)
port 14 : (unmounted)
port 15 : (unmounted)
port 16 : (unmounted)
port 17 : (unmounted)
port 18 : (unmounted)
port 19 : (unmounted)
port 29 : (unmounted)
z port xx
Displays each port. The number of ports are depend on the device.
z Tx power
Displays the strength of the output laser.
z Rx power
Displays the strength of the input laser.
z Temperature
Displays the temperature of the optical module.