Filter
Top Products
XG2000 series User's Guide
99/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
5.6 Configuration File Operation Commands
This section explains the commands related to configuration files and file operations within volatile memory.
5.6.1 copy running-config startup-config
Function
Stores the configuration file (running-config) in volatile memory to the startup-config file in nonvolatile memory.
After changing running-config, use this command to use the same configuration file after restarting the system.
Prompt
xg#
Command syntax
copy running-config startup-config
Command type
Operation management command
Note
z When the system is restarted without saving the information of running-config into startup-config, the information set in
running-config will be lost.
z Be sure to upload the contents of the existing startup-config file to a remote server prior to saving running-config as the
contents of startup-config will be overwritten.
Example
Store running-config in startup-config. Then, check the information in startup-config using the show command.
xg# copy running-config startup-config
xg# show startup-config
5.6.2 show running-config
Function
Displays the configuration information (running-config) currently operating in volatile memory.
Prompt
xg#
Command syntax
show running-config
Command type
Operation management commands
Example
Display the contents of running-config.
xg# show running-config