Filter
Top Products
XG2000 series User's Guide
92/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
5.5.3 show radius
Function
Displays the information of RADIUS server.
Prompt
xg#
Command syntax
show radius
Command type
Operation management command
Output form
xg# show radius
RADIUS Information 2008/05/20-16:26:00
================================================================================
Global Parameters
===============================================
Secret Key : radius-b1
Timeout(sec) : 3
Server Information
=============================================================================
[No.1]
Host : 192.168.0.10
Auth Port : 1812
Secret Key: alkdje
[No.2]
Host : 192.168.0.11
Auth Port : 1812
Secret Key: dkaaff
[No.3]
Host : back-radius-server
Auth Port : 1645
Secret Key: owqkz
[No.4]
Host : sample.com
Auth Port : 1812
Secret Key: poiure123
================================================================================
Global Parameters
Displays the common information for configuring RADIUS servers.
z Secret Key
Displays a secret key which is used as a default parameter when the RADIUS server is registered
without secret key.
z Timeout (sec)
Displays timeout for access replay from a RADIUS server in seconds.
Server Information
Displays the current settings of RADIUS servers.
z [No. 1]
Indicates the register number of the RADIUS server. Access requests to RADIUS servers are
transmitted in order of the number.
z Host
Displays IP address or hostname of the RADIUS server.
z Auth Port
Displays UDP port number of the RADIUS server.
z Secret Key
Displays a secret key used by the device and the RADIUS server.
Note
z Displayed secret keys are not encrypted.
Example
Displays the information of RADIUS server.
xg# show radius