Filter
Top Products
XG2000 series User's Guide
213/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
5.16.4 monitor qos-priority-traffic-bytes
Function
Displays the number of bytes received at each port for each QoS priority.
Prompt
xg> or xg#
Command syntax
monitor qos-priority-traffic-bytes { current | total } [interval <3-60>]
Parameter
z { current | total }
Specifies the statistics to be displayed.
− current
Displays the number of bytes in each QoS priority received after startup of this command.
− total
Displays the number of bytes in each QoS priority received after the system startup.
z interval <3-60>
Specifies the update interval (in seconds).
The default interval is 3 seconds.
Command type
Operation management command
Output form (if "current" is specified)
xg# monitor qos-priority-traffic-bytes current
Qos Priority Traffic Statistics(Current Frame Bytes) 2007/01/22-12:12:15
===================================================================================>
Port Priority-0 Priority-1 Priority-2 Priority-3 Priority-4 Priority-5 Priority-6
Bytes Bytes
Bytes Bytes Bytes Bytes Bytes
---- ----------- ----------- ----------- ----------- ----------- ----------- -----------
1 1234567890K 1234567890K 1234567890 1234567890 1234567890 1234567890 1234567890
2
0 0 0 0 0 0 0
3 1234567890K 1234567890K 1234567890K 1234567890K 1234567890K 1234567890K 1234567890K
4 1234567890M 256890M 256890M 256890M 256890M 256890M 256890M
5 1234567890G 256890G 256890G 256890G 256890G 256890G 256890G
6 1234567890T 256890T 256890T 256890T 256890T 256890T 256890T
7 0
0 0 0 0 0 0
8 0
0 0 0 0 0 0
===================================================================================>
ESC:exit F:refresh
U:page up D:page down L:page left R:page right
(continues)
Qos Priority Traffic Statistics(Current Frame Bytes) 2007/01/22-12:12:15
<================================================================================
Priority-7 Port-Description
Bytes
----------- ---------------------------------------------------
1234567890 port_name1
0 port_name2
1234567890K port_name3
256890M port_name4
256890G port_name5
256890T port_name6
0 port_name7
0
<================================================================================
ESC:exit F:refresh
U:page up D:page down L:page left R:page right
z Port
Displays the port numbers. Statistics for each port are displayed on one line.
z Priority-0 Bytes - Priority-7 Bytes
Display the accumulated number of bytes for each of priority 0 through 7 received at each
port after the command execution, using 10-digit, right-justified values.
z Port-Description
Displays port descriptions. If the port is not described, it will not display anything.
Up to 51 characters can be displayed.